Head Lamps High Beam Function

Necessary conditions to switch ON :
1. By pushing down the High Beam lever switch if
  - the Head lamp switch is in position 'Head lamp Low Beam' or the Head lamps Low Beam have been turned ON by the Auto light function.
2. By pulling the High Beam lever switch toward the driver (Flash to pass activation)
3. By the DRL function activation for Canada.
Necessary conditions to switch OFF :
1. By pulling back the High Beam lever switch (manual reset by the driver) or
2. If the Head lamps Low Beam are turned OFF or if the Auto light function is active but the Auto light Sensor signal status is not 'HL ON') or
3. By releasing the Flash To Pass activation and
4. If the DRL function is deactivated for Canada.
Functional diagram

Fig 1: Head Lamps High Beam Function - Functional Diagram
Courtesy of KIA MOTORS AMERICA, INC.