Heater Control Unit Replacement

Remove the center fascia panel.
Remove the console upper cover (A).
Disconnect the connector (B).

Fig 1: Console Upper Cover
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the air vent mounting screw, then remove the air vent (A).

Fig 2: Center Air Vent
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the heater control unit mounting screws, then remove the heater control unit (A).

Fig 3: Heater Control Unit
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector (A) is plugged in properly.
Fig 4: Heater Control Unit Connectors (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Heater Control Unit Connectors (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.