LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Sorento Base, 2.4L Eng VIN 1, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L GDI >> Camshaft Position Sensor (CMPS) (VIN 6) >> Repair Procedures >> Removal >> Bank 1/Intake
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Bank 1/Intake

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Camshaft Position Sensor Component Location, Connector And Bolt (Bank 1/Intake) (VIN 6)
    G09764326Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals