Repair procedures: Removal
- Remove the ignition key from the vehicle.
- Disconnect the battery negative cable and wait for at least three minutes before beginning work.
- Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
- Remove the floor console. (Refer to the CONSOLE )
- Pull the lock (1) forward. Pull the lever (3) after pressing the lever lock (2). Disconnect the airbag system control module (SRSCM) connector (A) and (B).
- Disconnect the SRSCM harness connector(A) and (B) from the SRSCM.
- Remove the SRSCM mounting bolts(3EA) from the SRSCM, then remove the SRSCM.