LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C1237: Primary Pressure Sensor-Signal >> General Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • Voltage Monitoring
  1. External noise
  2. Faulty pressure sensor
Enable Conditions
  • If input signal is noisy, Which the gradient of the sensor signal is larger than predefined value for specific times, ECU detect the failure.
  • Outside an ABS/ESC control, And after normal operation of BLS, If the pressure sensor signal is higher than 20bar and BLS is low for 3sec, ECU detect the failure.
Fail Safe
  • Inhibit the ESC/HAC control and allow the ABS/EBD control
  • The ESC warning lamp is activated
scientia non olet · About LEMON Manuals