Repair Procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.

Install the front lower arm to the sub-frame and then tighten the bolts (A, B) and nuts.
Tightening torque:

140 ~ 160 N.m (14.0 ~ 16.0 kgf.m, 101 ~ 116 lb-ft)

Fig 1: Identifying Front Lower Arm Bolts
Courtesy of HYUNDAI MOTOR CO.
Connect the lower arm (B) ball joint with the knuckle and then tighten the bolt and nut (A).
Tightening torque:

100 ~ 120 N.m (10.0 ~ 12.0 kgf.m, 72 ~ 87 lb-ft)
Install the split pin to the bolt.

Fig 2: Identifying Lower Arm
Courtesy of HYUNDAI MOTOR CO.
Install the front wheel & tire.
Tightening torque:

90 ~ 110 N.m (9.0 ~ 11.0 kgf.m, 65 ~ 80 lb-ft)