Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the resonator and the air intake hose (Refer to "INTAKE & EXHAUST SYSTEM ").
Disconnect the ETC module connector (A).

Fig 1: ETC Module Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the coolant hoses (B).
Remove the installation bolts (C), and then remove the ETC module from the engine.

Fig 2: Coolant Hoses & Installation Bolts
Courtesy of KIA MOTORS AMERICA, INC.