Repair Procedures: Removal

WARNING: This page is about a different car, the 2013 Hyundai Tucson and 2012 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Put on gloves to protect your hands.
Use seat covers to avoid damaging any surfaces.

Remove the following items.
1. Front pillar trim
  (Refer to the INTERIOR TRIM .) )
2. Inside rearview mirror
  (Refer to the MIRROR .)
3. Rain sensor
  (Refer to the ROOF TRIM .)
4. Wiper arm
  (Refer to the COWL TOP COVER .)
5. Cowl top cover
  (Refer to the COWL TOP COVER .)
6. Windshield glass deicer connector
  (Refer to the WINDSHIELD WIPER/WASHER .)
Using a screwdriver or remover, remove the windshield molding (A).

Fig 1: Identifying Windshield Molding
Courtesy of HYUNDAI MOTOR CO.
Cut out the sealant using the sealant cutting tool [A (09861-31100)].

Fig 2: Cutting Out Sealant Using Sealant Cutting Tool
Courtesy of HYUNDAI MOTOR CO.
Remove the windshield (B) carefully using the glass holder (A).

Fig 3: Removing/Installing Windshield Using Glass Holder
Courtesy of HYUNDAI MOTOR CO.