Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.

Change the shift lever to "N" range.
Remove the valve body assembly (Refer to REPAIR PROCEDURES .
Tightening Torque:
Disconnect the input & output speed sensor connector (A).
Loosen the main connector bolt (B).

Fig 1: Input & Output Speed Sensor And Main Connector Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the solenoid valve connector (A).
Remove the solenoid valve connector clip (B) after loosening a bolt.

Fig 2: Solenoid Valve Connector Clip (B)
Courtesy of KIA MOTORS AMERICA, INC.