LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2014 >> Sorento SX, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Disconnect the crankshaft position sensor connector (A).
  4. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
    Fig 1: Identifying Crankshaft Position Sensor Connector And Bolt
    G09765312Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals