Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the cover.
Disconnect the ECM connector (A) and the TCM connector (B).

Fig 1: Identifying ECM And TCM Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM & TCM bracket mounting bolts (A) and nut (B).

Fig 2: Identifying ECM And TCM Bracket Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
After removing the mounting bolts (A), remove the ECM (B) from the bracket.

Fig 3: Identifying ECM Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.