LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Optima Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L - Optima >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the boost pressure sensor connector (A).
  3. Remove the installation bolts (B), and then remove the sensor from the surge tank.
    4. Fig 1: Boost Pressure Sensor (BPS)
    G00535117Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals