LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Rio LX, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Release the residual pressure in fuel line (Refer to the "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
  2. Remove the rear seat [LH] (Refer to REAR SEAT "Seat" in BD group).
  3. Remove the fuel pump service cover (A).
    Fig 1: Identifying Fuel Pump Service Cover
    G08321557Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel pump connector (A).
  5. Disconnect the fuel feed tube quick connector (B).
  6. Disconnect the fuel tank pressure sensor connector (C).
  7. Disconnect the vapor tube quick-connector (D).
  8. Remove the plate cover (E) after removing the installation bolts, and then remove the fuel pump from the fuel tank.
    Fig 2: Identifying Fuel Pump Connector, Fuel Feed Tube Quick Connector, Pressure Sensor Connector, Vapor Tube Quick-Connector And Plate Cover
    G08321558Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Identifying Fuel Pump Assembly
    G08321559Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals