LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Hood Assembly) >> Hood Latch >> Repair Procedures >> Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the charge door handle (A).
    Fig 1: Remove Charge Door Handle
    G11934212Courtesy of KIA MOTORS AMERICA, INC.
  2. Loosen the front bumper upper cover mounting bolts and clips.
    Fig 2: Loosen Front Bumper Upper Cover Mounting Bolts And Clips
    G11934213Courtesy of KIA MOTORS AMERICA, INC.
  3. Gently lift the bumper upper cover.
  4. Loosen the screw (B), and then remove the front bumper upper cover (A).
    Fig 3: Remove Front Bumper Upper Cover
    G11934214Courtesy of KIA MOTORS AMERICA, INC.
  5. Loosen the bolts, and then remove the hood latch assembly (B).
    Fig 4: Remove Hood Latch Assembly
    G11934215Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the hood latch cable (A) and remove the hood lower latch assembly (B).
    Fig 5: Disconnect Hood Latch Cable
    G11934216Courtesy of KIA MOTORS AMERICA, INC.
  7. Install in the reverse order of removal.

    Information 

    • Make sure that the hood latch release cable is connected properly.
    • Make sure that the hood locks/unlocks and opens/closes properly.
    • Adjust the latch alignment.