Repair Procedures: Replacement

WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the front pillar trim.
1. Use the following tool (A) to remove the front pillar trim.
  
  Fig 1: Removing Front Pillar Trim
  Courtesy of KIA MOTORS AMERICA, INC.
2. Slightly spread open the front pillar trim and then place the tool (A) on the mounting clip (B) as in the picture below.
  After placing the tool (A) on the mounting clip (B), push it forward.
  NOTE:
  - Once the front pillar trim has been removed, replace the clips to new ones.
  Fig 2: Tool And Mounting Clip
  Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the front pillar trim (A).
  
  Fig 3: Front Pillar Trim
  Courtesy of KIA MOTORS AMERICA, INC.
  - How to mount front pillar trim
  Fig 4: Installing Front Pillar Trim
  Courtesy of KIA MOTORS AMERICA, INC.
  NOTE:
  - Remove the mounting clip (A) by turning it clockwise.
  Fig 5: Turning Mounting Clip Clockwise
  Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Replace any damaged clips.