LCD Monitor Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the center fascia upper panel.
After loosening the mounting screws, then remove the LCD monitor (A).

Fig 1: Locating LCD Monitor With Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connectors (A) from the LCD monitor.

Fig 2: Locating LCD Monitor Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector are connected in properly.
- Replace any damage clips.