LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> 35R Clutch Control Solenoid Valve (35R/C_VFS) >> Repair procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G11784318Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (10) and signal terminal (6).

    Specification:  5.1 ± 0.3 Ω

    Fig 2: Solenoid Valve Connector Terminals
    G11784319Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals