October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

Connect the Inhibitor switch connector.
Ignition KEY "ON" & Engine "OFF".

Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

Specification: See below "Signal Code Table"

VOLTAGE SPECIFICATION

	P	P-R	R	R-N	N	N-D	D
Signal "1"	12V	12V	0	0	0	0	0
Signal "2"	0	12V	12V	12V	0	0	0
Signal "3"	0	0	0	12V	12V	12V	0
Signal "4"	0	0	0	0	0	12V	12V