Passenger Power Window Switch

Disconnect the negative (-) battery terminal.
Remove the rear door trim panel.
(Refer to Body - "REAR DOOR ")
Disconnect the connector from the power window switch module.

Fig 1: Disconnecting Connector From Power Window Switch Module
Courtesy of KIA MOTORS AMERICA, INC.
Remove the power window switch module (A) from the door trim after loosening the mounting screws (13EA).

Fig 2: Removing Power Window Switch Module From Door Trim Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Remove the module (A) from the sub box assembly after loosening the mounting screw (3EA).

Fig 3: Removing Module From Sub Box Assembly Mounting Screw
Courtesy of KIA MOTORS AMERICA, INC.