Power Window Main Switch Inspection

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to "FRONT DOOR TRIM ")
Disconnect the connector from the power window switch module.

Fig 1: Power Window Switch Module Connector End View
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table.
[Driver/Passenger Safety]

Fig 2: Continuity Reference Chart - Driver/Passenger Safety (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Continuity Reference Chart - Driver/Passenger Safety (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

[Driver Auto Down]

Fig 4: Continuity Reference Chart - Driver Auto Down (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Continuity Reference Chart - Driver Auto Down (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the power window switch (A) after loosening the screws.

Fig 6: Main Power Window Switch
Courtesy of KIA MOTORS AMERICA, INC.