LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Starting System - 1.6L) >> Starter Relay >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative terminal.
  2. Remove the fuse box cover.
  3. Remove the starter relay (A).
    Fig 1: Remove Starter Relay
    G11794717Courtesy of KIA MOTORS AMERICA, INC.
  4. Using an ohmmeter, check that there is continuity between each terminal.
    Terminal Value Measure
    30 - 87 1MΩ or Higher If there is continuity, replace the relay.
    Fig 2: Check Continuity Between Terminal Using Ohmmeter
    G11794718Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply 12V to terminal 85 and ground to terminal 86.

    Check for continuity between terminals 30 and 87.

    Terminal Value Measure
    30 - 87 1Ω or less If there is no continuity between the terminals, replace the relay.
    Fig 3: Check Continuity Between Terminals 30 And 87
    G11794719Courtesy of KIA MOTORS AMERICA, INC.
  6. If there is no continuity, replace the starter relay.
  7. Install the starter relay.
  8. Install the fuse box cover.
scientia non olet · About LEMON Manuals