Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

Remove the ignition key from the vehicle.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ASSEMBLY ")
Pull up the lock, of the SRSCM connector, the disconnect the connector (A and B).

Fig 1: Locating Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the SRSCM mounting bolts (3EA) from the SRSCM, then remove the SRSCM.