Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Lift the vehicle.
Remove the canister. (Refer to "Canister ".)
Support the fuel tank with a jack and then remove the right fuel tank band (A).

Fig 1: Locating Right Fuel Tank Band
Courtesy of KIA MOTORS AMERICA, INC.
Make a gap for removing the fuel tank pressure sensor by lowering the jack.
Remove the fuel tank pressure sensor (A) by unfastening the hook.

Fig 2: Removing Fuel Tank Pressure Sensor

Courtesy of KIA MOTORS AMERICA, INC.