LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Optima Hybrid >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 3) (HEV) >> DTC P0136: O2 Sensor Circuit(Bank 1/Sensor 2) >> Wiring Inspection >> Signal Circuit Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Signal Circuit Inspection

  1. Ignition "ON" & Engine "OFF".
  2. Measure voltage between signal terminal(Pin No. 1) of HO2S(B1S2) harness connector and chassis ground.

    Specification:  Approx. 0.4~0.5V

  3. Is voltage within the specification?

    YES 

    • Go to Component Inspection procedure below.

    NO 

    • Repair or replace as necessary and go to "Verification Of Vehicle Repair " procedure.
      NOTE: HO2S must have a clean air reference to function properly. The air is obtained by way of the sensor wire(s). Do not attempt to repair the wire(s), connector, or the terminals.
scientia non olet · About LEMON Manuals