Repair Procedures: Inspection

Tightening torque: 

7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

Fig 1: Removing Air Duct

Courtesy of KIA MOTORS AMERICA, INC.

1. Disconnect the breather hose (A).
2. Disconnect the air intake hose (B) and then remove the air cleaner assembly (C).

   Tightening torque: 

   Hose clamp bolt:

   2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)

   Air cleaner assembly bolts:

   7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

   Fig 2: Locating Breather Hose, Air Intake Hose And Air Cleaner Assembly

   Courtesy of KIA MOTORS AMERICA, INC.
   NOTE:

   • When installing the air intake hose, the plate of the hose clamp must be in line with the stopper of the hose.
   • When installing the air intake hose, the center of the mark of hose must be in line with the throttle body rib.
   Fig 3: Aligning Plate Of Hose Clamp With Stopper Of Hose

   Courtesy of KIA MOTORS AMERICA, INC.