LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Optima Hybrid >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (HEV) >> Shift Lever >> Repair Procedures >> Disassembly >> Manual Mode Switch Housing Replace
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manual Mode Switch Housing Replace

  1. Loosen the screw and remove the "P" position switch (A).
    Fig 1: Locating P Position Switch
    G11816190Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the plastic bracket (A) and remove the shift lock solenoid (B).
  3. Remove the main connector (C).
    Fig 2: Removing Plastic Bracket
    G11816191Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the screw and remove the manual mode switch housing (A).
    Fig 3: Locating Manual Mode Switch Housing
    G11816192Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the wiring fixed bracket (A) of main connector.
    Fig 4: Locating Wiring Fixed Bracket Of Main Connector
    G11816193Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the wiring of manual mode switch housing from the main connector.
    NOTE: Check the wiring color before disconnecting the wiring.
    Fig 5: Removing Wiring Of Manual Mode Switch Housing From Main Connector
    G11816194Courtesy of KIA MOTORS AMERICA, INC.
    Terminal Function
    3 "P" position switch (+)
    4 "P" position switch (+)
    5 Manual mode down
    6 Manual mode select
    7 Manual mode up
    9 Ground
    10 Shift lock solenoid (-)
    11 Shift lock solenoid (-)
scientia non olet · About LEMON Manuals