LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Power Trunk Module) >> Power Latch Assembly >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk lid trim after opening the trunk.

    (Proceed to Body - "TRUNK TRIM ".)

  3. Remove the power latch (A) after disconnecting the connector (B) and mounting bolts.
    Fig 1: Removing Power Latch Mounting Bolts
    G11803851Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power cinching actuator (A) after disconnecting the connector and mounting bolts.
Fig 2: Removing Power Cinching Actuator Mounting Bolts
G11803852Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals