LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Supplemental Restraint System Control Module (SRSCM) & Sensors) >> Weight Classification System (WCS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Forte5, 2016 Kia Forte Koup, and 2016 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ")

  3. Remove the seat track assembly.

    (Refer to Body - "FRONT SEAT ")

NOTE:
  • There are several DTC cases, please check below status.
    Case A B1763 OCS ECU Defect
    Case B B1323 OCS Sensor Defect
    Case C B1319 OCS Required Weight Check
    Case D B1697 ACU Communication error
  • Case A. B. Remove the seat track assembly of the front passenger seat. After replacing, perform WCS reset and DTC clear.
  • Case C. Perform WCS reset and accuracy check, if accuracy check result is accepted and DTC is historic, WCS can be re-used.
  • Case D. Check wirings and connectors. If there is no DTC after WCS reset and DTC clear, WCS can be re-used.
scientia non olet · About LEMON Manuals