Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the audio/AVN head unit assembly.
(Refer to "AUDIO UNIT .")

(Refer to "AVN HEAD UNIT .")
Remove the glove box housing assembly.
(Refer to "GLOVE BOX HOUSING .")
Separate the wiring fixed clip (A) on the BCM bracket.

Courtesy of
Loosen the mounting nuts from the BCM unit.

Courtesy of
Disconnect the connectors from the BCM (in the order as shown in the illustration below).

Fig 1: BCM Connector
Courtesy of KIA MOTORS AMERICA, INC.
1. Disconnect the connectors (A) from the direction of removing the Audio/AVN head unit.
  
  Fig 2: AVN Head Unit Connector
  Courtesy of KIA MOTORS AMERICA, INC.
2. Disconnect the connectors (A) from the direction of removing the glove box housing.
  
  Courtesy of