Repair Procedures: Replacement
CAUTION:
- Put on gloves to protect your hands.
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Remove the floor console assembly.
(Refer to "FLOOR CONSOLE ASSEMBLY .")
- Loosen the rear console cover mounting screws (A).
- Using a screwdriver or remover, remove the rear console cover (A).
- Install in the reverse order of removal.
Information
- Make sure the connector is connected properly.
- Replace any damaged clips.