Repair Procedures: Replacement

CAUTION:

Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
The boot band should be replaced with a new one.

Remove the Front Driveshaft.
(Refer to "FRONT DRIVESHAFT .")
Remove the BJ circlip (B) from the TJ housing (A).

Courtesy of
Remove both boot bands from the TJ housing.

Courtesy of

Courtesy of
Remove the TJ circlip (A).

Courtesy of
CAUTION:
- Make alignment marks on spider roller assembly (A), TJ housing (B), and shaft spline (C) to aid reassembly.
Courtesy of
Remove the snap ring (A) from the shaft.

Courtesy of
Remove the spider assembly (B) from the driveshaft (A) using the special tool (09495-33000).

Courtesy of
Clean the spider assembly.
Remove the TJ boot (A).
CAUTION:
- For reusing the boot (A), wrap tape (B) around the driveshaft splines (C) to protect the boot (A).
Courtesy of