High Pressure Fuel Line

Turn the ignition switch OFF, and then remove battery (-) cable.
Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ".)
Disconnect the Engine Coolant Temperature Sensor connector (A).

Courtesy of
Disconnect the ignition coil connector (A) and CMPS connector (B).
Unfasten the harness bracket (C) and Make a gap for removing high pressure fuel pipe by moving the bracket (C).

Courtesy of
Remove the vacuum pipe mounting bolt (A)
Remove the vacuum pipe & high pressure fuel pipe function block mounting bolt (B).
Remove the high pressure fuel pipe flange nut (C).
High pressure fuel pipe flange nut:

26.5 ~ 32.4 N.m (2.7 ~ 3.3 kgf.m, 19.5 ~ 23.9 lb-ft)

High pressure fuel pipe function block mounting bolt:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Courtesy of
Remove the high pressure fuel pipe flange nut from the high pressure fuel pump with the special service tool (A). [SST No.: 09314-3Q100 or 09314-27130]
High pressure fuel pipe flange nut:

26.5 ~ 32.4 N.m (2.7 ~ 3.3 kgf.m, 19.5 ~ 23.9 lb-ft)

Courtesy of
Remove the high pressure fuel pipe (A).

Courtesy of

Courtesy of