Repair Procedures: Removal

Remove the fuel pump.
(Refer to "FUEL PUMP .")
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

Courtesy of
Remove the head assembly (A) after releasing the cushion fixing clip (B).

Courtesy of
Disconnect the fuel tube connector (A).

Courtesy of
Remove the reservoir - cup (B) after releasing the fixing hooks (A).

Courtesy of
Disconnect the fuel tube quick-connector (A).
Release the fixing hooks, and then remove the pre-filter (B).

Courtesy of
Remove the fuel pressure regulator (A).

Courtesy of

NOTE: Be careful of O-ring