DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible cause
DTC Strategy	Signal monitoring	Poor connector connection Electrical noise signal Abnormal off-set of pressure sensor Faulty master pressure sensor Faulty HECU
Enable Condition	Ignition "ON" During vehicle operation condition No related DTC is stored
Threshold Value	Filtered sensor signal is ±15bar for more than 2s, when no braking, motor operation, no low voltage condition and accelerator pedal position higher than 40% * If signal is within ±15bar, then perform pressure off-set calibration
Disable Condition	Ignition "OFF" and then "ON" and vehicle speed over 6km/h (4mph) and BLS off and master cylinder pressure less than 15bar and accelerator pedal position higher than 20%
Warning Lamp	ABS/ESC (ESP) Warning Indicator Lamp "ON"
Failsafe	-