LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte Koup EX, Standard Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle Control System >> Control Shaft Complete >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Install the control shaft complete after setting the neutral state.
    • Apply the sealant to the contact surface of transaxle and control shaft.

      Specified sealant  : Anaerobic adhesive for flange

    Fig 1: Applying Sealant To Contact Surface Of Transaxle And Control Shaft
    G12162271Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals