LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System - 2.0L GDI) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  • DON'T use a cleaner, spray, or grease to sensing element and connector of the sensor because oil component in them may malfunction the sensor performance.
  • Sensor and its wiring may be damaged in case of contacting with the exhaust system (Exhaust Manifold, Catalytic Converter, and so on).
  1. Install in the reverse order of removal.

    Heated Oxygen Sensor Mounting: 

    39.2 - 49.1 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb.ft)

scientia non olet · About LEMON Manuals