LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Blind Spot Detection System Diagnosis) >> DTC C2702-54: Control Module Missing Calibration >> DTC Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Check the installation angle or perform the calibration
  1. BSD installation angle failure
  2. Control Module missing calibration
Enable Conditions
  • 1.6s after ignition "ON"
  • Battery voltage is greater than 9V and less than 16V for more than 1s
Threshold Value
  • No execution of calibration
  • When sensor installation angle is out of specification range
Detecting Time
  • 1s
Fail-safe
  • BSD prohibited
  • BSD switch LED "OFF"
  • BSD warning LED "OFF"
scientia non olet · About LEMON Manuals