Repair Procedures: Inspection
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch OFF.
- Disconnect the ATS connector.
- Measure resistance between the ATS terminals 1 and 2 [B1/S1].
- Check that the resistance is within the specification.
Temperature [°C (°F)] Resistance (kΩ) -30 (-22) 480.41 -20 (-4) 271.21 0 (32) 95.10 20 (68) 37.32 30 (86) 24.26 40 (104) 16.13 50 (122) 10.95