Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Disconnect the back-up lamp switch connector (A).

Fig 1: Disconnecting Back Up Lamp Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
If necessary, remedy or replace the backup lamp switch.

Fig 2: Checking Continuity Between No. 1 And 2 Terminals Of Back-Up Lamp Switch

Courtesy of KIA MOTORS AMERICA, INC.