Repair Procedures: Removal

Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).

Fig 1: Locating Filler-Neck Assembly Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Lift the vehicle.
Remove the rear-LH wheel, tire, end the inner wheel house (A).

Fig 2: Locating Inner Wheel House
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).
Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (D).

Fig 3: Locating Fuel Filler Hose, Leveling Hose, Ventilation Hose And Bracket Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.