Free Running Inspection
WARNING: This page is about a different variant/trim than selected.
- Place the starter motor in a vise equipped with soft jaws and connect a fully-charged 12-volt battery to starter motor as follows.
- Connect a test ammeter (150-ampere scale) and carbon pile rheostats shown is the illustration.
- Connect a voltmeter (15-volt scale) across starter motor.
- Rotate carbon pile to the off position.
- Connect the battery cable from battery's negative post to the starter motor body.
- Adjust until battery voltage shown on the voltmeter reads 11volts.
- Confirm that the maximum amperage is within the specifications and that the starter motor turns smoothly and freely.
Type Current (A) Speed (rpm) ISG type Max. 100 Min. 1, 915 Non-ISG type Max. 70 Min. 2, 400