LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - 2.0L) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the mounting bolt.
Fig 1: Locating Crankshaft Position Sensor Connector
G12239118Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Locating Crankshaft Position Sensor
G12239119Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals