Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Using a screwdriver or remover, remove the hood release handle (A).
Information
- Use a 6mm hex bit to press the center until the handle easily pulls off the post.
  
  Fig 1: Remove Hood Release Handle
  Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
NOTE:
- Make sure that the hood latch cable is connected properly.
- Make sure that the hood locks/unlocks and opens/closes properly.