LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte5 EX >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 18 (Manual Transaxle Control System) >> Control Shaft Complete >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • Install the control shaft complete after setting the neutral state.
    • Apply the sealant to the contact surface of transaxle and control shaft.

      Specified sealant  : Anaerobic adhesive for flange

    Fig 1: Applying Sealant To Contact Surface Of Transaxle And Control Shaft
    G12162271Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals