Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.

Shift the gear to "N".
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY REMOVAL ")
Remove the shift cable (B) from the bracket after loosening a nut (A).

Fig 1: Locating Shift Cable & Bracket Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the knob & boots (A) by pulling it in the direction of arrow after removing the boots from the console upper cover.

Fig 2: Remove Knob & Boot
Courtesy of KIA MOTORS AMERICA, INC.
Remove the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ")
Remove the shift cable (A) after separating the snap pin.

Fig 3: Locating Shift Cable
Courtesy of KIA MOTORS AMERICA, INC.
Remove the SRS Control Module (SRSCM).
(Refer to Restraint - "SRS CONTROL MODULE ")
Remove the shift cable retainer (A) after loosening the nuts. Then, remove the shift cable by pulling it toward the vehicle interior.

Fig 4: Locating Shift Cable Retainer With Nuts
Courtesy of KIA MOTORS AMERICA, INC.