Component Replacement After Deployment
NOTE:
Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the DTC INDEX
Diagnostic Trouble Code list for repairing of the related DTCs.
When the front airbag (s) deployed after a collision, replace the following items.
- SRSCM
- Deployed airbag (s)
- Seat belt pretensioner (s)
- Emergency fastening device
- Front impact sensors
- Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
When the side/curtain airbag (s) deployed after a collision, replace the following items.
- SRSCM
- Deployed airbag (s)
- Side impact sensor (s) for the deployed side (s)
After the vehicle is completely repaired, confirm the SRS airbag system is OK.
- Turn the ignition switch ON, the SRS indicator should come on for about 6 seconds and then go off.