LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Stinger Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 3.3L) >> Injector >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition.
  2. Disconnect the injector connector.
  3. Measure resistance between the injector terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification  : 1.35 - 1.38 [20°C (68°F)]

scientia non olet · About LEMON Manuals