LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Stinger Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 3.3L) >> Oil Pressure Sensor (OPS) >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition.
  2. Disconnect the OPS connector.
  3. Remove the OPS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the OPS terminals 2 and 4.
  5. Check that the resistance is within the specification.
    Pressure (Bar) Output Voltage (V) [Vref=5V]
    0 0.5
    5 2.5
    10 4.5
scientia non olet · About LEMON Manuals