LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Stinger Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (AWD Control System) >> AWD Ecu >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - " CRASH PAD LOWER PANEL  ") 

  3. Remove the knee airbag.

    (Refer to Restraint - " KNEE AIRBAG (KAB) MODULE  ") 

  4. Disconnect the AWD ECU connector (A).
    G12789705Courtesy of KIA MOTORS AMERICA, INC.
  5. Loosen the AWD ECU bracket nuts and then remove the AWD ECU (A).
G12789706Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals