Repair Procedures: Removal

Remove the front wheel and tire (A) from front hub.
Tightening torque:

88.2 - 107.8 N.m (9.0 - 11.0 kgf.m, 65.0 - 79.5 lb.ft)

Fig 1: Locating Front Wheel & Tire
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Be careful not to damage the hub bolts when removing the wheel & tire (A).
Remove the wheel speed sensor (A) from the knuckle.
Tightening torque:

8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

Fig 2: Locating Wheel Speed Sensor
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the wheel speed sensor.
Loosen the bolt (A) and then remove the bracket.

Fig 3: Locating Wheel Speed Sensor & Bracket Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front wheel guard.
(Refer to body - "FRONT WHEEL GUARD ")
Disconnect the front wheel speed sensor connector (A).

Fig 4: Locating Front Wheel Speed Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.